DIN Rail mounted Cellular 4G LTE Router with IO Port

DIN Rail mounted Cellular 4G LTE Router with IO Port

R100-L is an intelligent cellular router designed for industrial applications requiring faultless connectivity. It provides a secure, reliable, real-time, remote connectivity for SCADA, distribution management systems, metering etc. Software-defined, multi-carrier networking, dual SIM models, 802.11n and global 2.5G/3G/HSPA+/LTE options make it easy to get connected. With DIN-rail mounting, wide operating temperature range, and IP30 metal housing, the R100 is a convenient yet reliable solution for any industrial wireless applications.

Productos Detalle

Specification of this DIN Rail mounted Cellular 4G LTE Router with IO Port
 
R100-L is an intelligent cellular router designed for industrial applications requiring faultless connectivity. It provides a secure, reliable, real-time, remote connectivity for SCADA, distribution m
  • anagement systems, metering etc. Software-defined, multi-carrier networking, dual SIM models, 802.11n and global 2.5G/3G/HSPA+/LTE options make it easy to get connected. With DIN-rail mounting, wide o
  • perating temperature range, and IP30 metal housing, the R100 is a convenient yet reliable solution for any industrial wireless applications.
  • Advanced Failover: Maximize uptime by seamlessly switching between the multiple Internet interfaces (cellular, WAN, Wi-Fi, dual-SIM).
  • Multiple Tunneling Schemes: Secure your data using a variety of VPN tunneling schemes, including IPSec, L2TP, PPTP, OpenVPN and GRE.
  • Flexible Wi-Fi: 802.11 b/g/n, configurable Wi-Fi as WAN or access point, Wi-Fi Security (WEP / WPA / WPA2 Mixed Mode) and multiple SSID.
 
Ethernet, serial and I/O for connecting diverse field assets.
 

Remote Management provides mass configuration, device management, OTA update, and troubleshooting tools.

Parameters of this DIN Rail mounted Cellular 4G LTE Router with IO Port





Cellular Module

Industrial cellular module

Standard and Band

LTE FDD: B1/B2/B3/B4/B5/B7/B8/B20 (2100/1900/1800/1700/850/2600/900/800MHz)

FDD: B2/B4/B5/B13/B17/B25/B26 (Optional), B1/B2/B3 /B5/B7/B8/B20/B28 (Optional)

LTE TDD: B38/B39/B40/B41   







HSPA+/HSUPA/HSDPA/WCDMA/UMTS 2100/1900/900/850MHz

EDGE/GPRS/GSM 1900/1800/900/850MHz

Bandwidth

LTE(DL:150Mbps,UL:50Mbps)

HSPA+: 21Mbps(Download speed) 5.76Mbps(Upload speed)

HSUPA:5.76Mbps(Upload speed)

HSDPA:7.2Mbps(Download speed)

UMTS:384Kbps (DL/UL)

CDMA2000 1X EVDO: 3.1Mbps(DL)/1.8Mbps(UL)

EDGE: 236.8Kbps(DL/UL)

GPRS: 85.6Kbps

TX power

<23dBm

 RX sensitivity

<-93.3dBm

GPS Specification (Optional)

Item

Content




GPS Module

Industrial GPS module

Receiver Type

50-channel

GPS L1(1575.42MHz)C/A code

SBAS: WAAS,EGNOS,MSAS,GAGAN

Support GALILEO


Max. update rate

4 Hz

Accuracy




Position: 2.5m CPE

SBAS: 2.0m CPE

Acquisition

Cold starts: 29S

Warm starts: 29S



Aided starts: <1S

Hot starts: <1S

Sensitivity

Tracking: -160dBm



Reacquisition: -160dBm

Cold starts: -144dBm

Timing accuracy

RMS: 30ns

99%: <60ns

Granularity: 21ns

 Time pulse

Configurable, 0.25 to 1000Hz

WIFI Specification

Item

Content


Standard

IEEE802.11b/g/n

Bandwidth


IEEE802.11b/g: 54Mbps (max)

IEEE802.11n: 150Mbps (max)

Security

WEP, WPA, WPA2, etc.

WPS (optional)

TX power

20dBm(11n),24dBm(11g),26dBm(11b)

 RX sensitivity

<-72dBm@54Mpbs 

Hardware System

Item

Content

CPU

Industrial 32bits CPU

FLASH

16MB(Extendable to 64MB)

 SDRAM

128MB

Input/Output

Item

 Content

Pin

 (6)pin 3.5mm terminal blook

I/O Port

 2*DI; 1*DO; 1*Relay

Input ON Voltage

5 to 30 VDC

Input OFF Voltage

0 to 3 VDC

 Output

< 50mA @ 30VDC

Interface type

Item

Content

WAN

1 10/100 Mbps WAN port(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection





LAN

4 10/100 Mbps Ethernet ports(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection

Serial

1 RS232(or RS485/RS422) port, 15KV ESD protection

Data bits: 5, 6 ,7, 8

Stop bits: 1, 1.5(optional), 2

Parity: none, even, odd, space(optional), mark(optional)

Baud rate: 2400~115200 bps


Indicator

"Power", "System", "Online-1", "Online-2", " Local Network ", "WAN", "WIFI", "Signal Strength"

Antenna

Cellular: 2 Standard SMA female interface, 50 ohm, lighting protection(optional)

WIFI: 1 Standard SMA male interface, 50 ohm, lighting protection(optional)

SIM/UIM

Standard 3V/1.8V user card interface, 15KV ESD protection

Power

Standard 3-PIN power jack, reverse-voltage and overvoltage protection

 Reset

Restore the router to its original factory default settings

Power supply

Item

Content

Standard Power

DC 12V/1.5A

 Power range

DC 5~36V

Consumption

Working condition

Consumption

Standby

290~340mA@12VDC

Communication

335~572mA@12VDC

 Schedule Shutdown

2.57~4.2mA@12DVC

Physical Characteristics

Item

Content

Housing

Iron, providing IP30 protection

Dimensions

133*115.7*45 mm

 Weight

520g

Environmental Limits

Item

Content

Operating Temperature

-35~+75ºC(-31~+167℉)

Storage Temperature

-40~+85ºC (-40~+185℉)

 
 
Operating Humidity

 

 

 

 

 
90% ( unfreezing)

Pictures of this DIN Rail mounted Cellular 4G LTE Router with IO Port

 
 Application of this DIN Rail mounted Cellular 4G LTE Router with IO Port
 
 
 
R100 series is an intelligent cellular router designed for industrial applications requiring faultless connectivity. It provides a secure, reliable, real-time, remote connectivity for SCADA, distribution management systems, metering etc. Software-defined, multi-carrier networking, dual SIM models, 802.11n and global 2.5G/3G/HSPA+/LTE options make it easy to get connected. With DIN-rail mounting, w

Etiquetas

dejar sus mensajes:

Enviar consulta ahora

Productos relacionados

Enviar consulta ahora