3G Dual sim Load Balancing Active Modem Router

3G Dual sim Load Balancing Active Modem Router

YF360D-HH Series LTE/lte WIFI bonding ROUTER is a kind of cellular terminal device that provides data transfer function by public cellular network. And it supports double link backup between cellular 1 and Celluar 2. It adopts high-powered industrial 32-bits CPU and embedded real time operating system. It supports RS232 (or RS485/RS422), Ethernet and WIFI port that can conveniently and transparently connect devices to a cellular network, allowing you to connect to your existing serial, Ethernet and WIFI devices with only basic configuration. It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.

Productos Detalle

Specification of this 3G Dual sim Load Balancing Active Modem Router
 
YF360D-HH Series LTE/lte WIFI bonding ROUTER is a kind of cellular terminal device that provides data transfer function by public cellular network. And it supports double link backup between LTE and L
TE.
It adopts high-powered industrial 32-bits CPU and embedded real time operating system. It supports RS232 (or RS485/RS422), Ethernet and WIFI port that can conveniently and transparently connect device

s to a cellular network, allowing you to connect to your existing serial, Ethernet and WIFI devices with only basic configuration.

  • It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.
  • Design for Industrial Application
  • High-powered industrial cellular module
  • High-powered industrial 32bits CPU
  • Adapt dual sim design to ensure the stable and reliable of the router
  • Support low-consumption mode, including sleep mode, scheduled online/offline mode, scheduled power-on/power-off mode(optional)

Housing: iron, providing IP30 protection.

  • Power range: DC 5~35V
  • Stability and Reliability
  • Support hardware and software WDT
  • Support auto recovery mechanism, including online detect, auto redial when offline to make router always online
  • Ethernet port: 1.5KV magnetic isolation protection
  • RS232/RS485/RS422 port: 15KV ESD protection
  • SIM/UIM port: 15KV ESD protection

Power port: reverse-voltage and overvoltage protection

  • Antenna port: lightning protection(optional)
  • Standard and Convenience
  • Support standard RS232(or RS485/RS422), Ethernet and WIFI port that can connect to serial, Ethernet and WIFI devices directly
  • Support standard WAN port and PPPOE protocol that can connect to ADSL directly
  • Support intellectual mode, enter into communication state automatically when powered
  • Provide management software for remote management

Support several work modes

  • Convenient configuration and maintenance interface(WEB or CLI)
  • High-performance
  • Support master module, standby module and WAN(PPPOE, ADSL) (optional) triple link backup
  • Support multiple WAN access methods, including static ip, DHCP, L2TP, PPTP,PPPOE, 3G/4G
  • Support Load Balancer and Load Shunt
  • Support VPN client(PPTP, L2TP, OPENVPN, IPSEC and GRE)
  • Support VPN server(PPTP, L2TP, OPENVPN, IPSEC and GRE)
  • Support local and remote firmware upgrade,import and export configure file.
  • Support NTP, RTC embedded.
  • Support multiple DDNS provider service.
  • Support VLANs, MAC Address clone, PPPoE Server
  • WIFI support 802.11b/g/n. support AP, client, Adhoc, Repeater, Repeater Bridge and WDS(optional) mode.
  • WIFI support WEP,WPA,WPA2 encryption, Support RADIUS authentication and MAC address filter.
  • Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout
  • Support APN/VPDN
  • Support DHCP server and client, firewall, NAT, DMZ host , URL block, QoS, ttraff,statistics, real time link speed statistics etc.
  • Full protocol support , such as TCP/IP, UDP, ICMP, SMTP(optional), HTTP, POP3(optional), OICQ(optional), TELNET, FTP(optional), SNMP, SSHD, etc.
 
Schedule Reboot, Schedule Online and Offline, etc.
 
Support GPS function (Optional)  
Parameters of this 3G Dual sim Load Balancing Active Modem Router Cellular Specification
Cellular Module Industrial cellular module
Standard and Band
LTE FDD: B1/B2/B3/B4/B5/B7/B8/B20 (2100/1900/1800/1700/850/2600/900/800MHz)
FDD: B2/B4/B5/B13/B17/B25/B26 (Optional), B1/B2/B3 /B5/B7/B8/B20/B28 (Optional)
LTE TDD: B38/B39/B40/B41   
HSPA+/HSUPA/HSDPA/WCDMA/UMTS 2100/1900/900/850MHz  EDGE/GPRS/GSM 1900/1800/900/850MHz
Bandwidth
LTE(DL:150Mbps,UL:50Mbps)
HSPA+: 21Mbps(Download speed) 5.76Mbps(Upload speed)
HSUPA:5.76Mbps(Upload speed)
HSDPA:7.2Mbps(Download speed)
UMTS:384Kbps (DL/UL)
CDMA2000 1X EVDO: 3.1Mbps(DL)/1.8Mbps(UL)
EDGE: 236.8Kbps(DL/UL) GPRS: 85.6Kbps
TX power <23dBm
 
 
RX sensitivity  
<-93.3dBm GPS Specification (Optional)
Item Content
GPS Module Industrial GPS module
Receiver Type
50-channel
GPS L1(1575.42MHz)C/A code
SBAS: WAAS,EGNOS,MSAS,GAGAN Support GALILEO
Max. update rate 4 Hz
Accuracy
Position: 2.5m CPE SBAS: 2.0m CPE
Acquisition
Cold starts: 29S
Warm starts: 29S
Aided starts: <1S Hot starts: <1S
Sensitivity
Tracking: -160dBm
Reacquisition: -160dBm Cold starts: -144dBm
Timing accuracy
RMS: 30ns
99%: <60ns Granularity: 21ns
 
Time pulse  
Configurable, 0.25 to 1000Hz WIFI Specification
Item Content
Standard IEEE802.11b/g/n
Bandwidth
IEEE802.11b/g: 54Mbps (max) IEEE802.11n: 150Mbps (max)
Security
WEP, WPA, WPA2, etc.  WPS (optional)
TX power 20dBm(11n),24dBm(11g),26dBm(11b)
 
RX sensitivity  
<-72dBm@54Mpbs   Hardware System
Item Content
CPU Industrial 32bits CPU
FLASH 16MB(Extendable to 64MB)
 
SDRAM  
128MB Interface type
Item Content
WAN 1 10/100 Mbps WAN port(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection
LAN 4 10/100 Mbps Ethernet ports(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection
Serial 
1 RS232(or RS485/RS422) port, 15KV ESD protection
Data bits: 5, 6 ,7, 8
Stop bits: 1, 1.5(optional), 2
Parity: none, even, odd, space(optional), mark(optional) Baud rate: 2400~115200 bps
Indicator "Power", "System", "Online-1", "Online-2", " Local Network ", "WAN", "WIFI", "Signal Strength"
Antenna
Cellular: 2 Standard SMA female interface, 50 ohm, lighting protection(optional) WIFI: 1 Standard SMA male interface, 50 ohm, lighting protection(optional)
SIM/UIM Standard 3V/1.8V user card interface, 15KV ESD protection
Power Standard 3-PIN power jack, reverse-voltage and overvoltage protection
 
Reset  
Restore the router to its original factory default settings Power supply
Item Content
Standard Power DC 12V/1.5A
 
Power range  
DC 5~36V Consumption
Working condition Consumption
Standby 290~340mA@12VDC
Communication 335~572mA@12VDC
 
Schedule Shutdown  
2.57~4.2mA@12DVC Physical Characteristics
Item Content
Housing Iron, providing IP30 protection
Dimensions 206x135x28 mm
 
Weight  
790g Environmental Limits
Item Content
Operating Temperature -35~+75ºC(-31~+167℉)
Storage Temperature -40~+85ºC (-40~+185℉)
 

Operating Humidity

95% ( unfreezing) Selection and Ordering Data
Model No. Description
YF360D-LL-4G 4G active/active Router 
 
YF360D-HH-3G
 
 

 

 
3G active/active RouterPictures of this 3G Dual sim Load Balancing Active Modem Router

 Application of this

3g dual sim bonding active router

YF360D-LL Series LTE/LTE WIFI ROUTER is a kind of cellular terminal device that provides data transfer function by public cellular network. And it supports double link backup between LTE and

 
LTE.
 
 
 
It adopts high-powered industrial 32-bits CPU and embedded real time operating system. It supports RS232 (or RS485/RS422), Ethernet and WIFI port that can conveniently and transparently conn

Etiquetas

dejar sus mensajes:

Enviar consulta ahora

Productos relacionados

Enviar consulta ahora